Designed for and named after one of the top FPV pilots in the world, the new Lumenier QAV210 CHARPU Carbon Fiber FPV Quadcopter airframe is CHARPU's new go to frame for acrobatic FPV sessions. The QAV210 CHARPU is an extended version of the new QAV180, Lumenier's smallest FPV quad kit to date. The QAV210 CHARPU is designed to be the smallest possible airframe while comfortably supporting 5" props and 220X size motors. The assembled kit containing Carbon Fiber Plates, Power Distribution Board and all hardware weighs in at only 91g. The included, but optional landing gear adds another 5g. Like it's popular 'big brother', the Lumenier QAV250, the QAV210 CHARPU utilizes high quality 3K carbon fiber that is precision machined for a superb fit-and-finish. The QAV210 CHARPU is an awesome FPV racer and acrobat. The frame is designed to mount a cased camera at a range of angles. Alternatively, the frame also includes a mounting plate to mount standard 32mm board cameras at a fixed 20 degree angle. The airframe is designed to support both 3s or 4s lipo setups and can comfortably carry 1000mah and 1300mah lipos.
- Full 3K Carbon Fiber airframe featuring a solid 3mm thick "Unibody" main plate.
- Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
- "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
- Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail.
- Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
- Easy Lipo Access (suggested Lipo is a 1300mah 3 or 4s)
- Support for 32mm board cams as well as 26mm cams in cases.
- Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)
- Included Landing Gear
- Airframe: 91g (with PDB and hardware), 96g with included Landing Gear.
- AUW: The QAV210 is flown with an AUW of 256-281g depending on motor choice (includes all flight electronics and FPV gear, but without Lipo or HD camera).
- 1x QAV210 CHARPU carbon fiber airframe, board camera mount, 26mm camera mount, and hardware
- 1x Lumenier 4Power Power distribution board + set of 6mm stand offs
- 1x XT-60 Pig-Tail and silicone grommet
- 1x set of 10mm aluminum landing gear and vinyl feet
- 4" Anti-Vibration neoprene tape
- 1x Lumenier lipo strap
Suggested PARTS LIST
- Taranis X9D
- FrSky D4R-ii
- Motors* – Cobra 2300kv or Cobra 2100kv
- Naze32 Acro
- DYS BL20A pre-flashed with BlHeli 13.2 with dampen light and OneShot auto detect
- OSDoge OSD (on screen display, LC filter, 5V for Naze32)
- GemFan 5030 or 5054 Props
- ImmersionRC 600mw Video Transmitter
- Spironet Antenna
- Sony Super HAD 600tvl Camera
- QAV210 Motor Guard