Lumenier QAV-X Build Kit

(1 review) Write a Review
Lumenier QAV-X Build Kit
All in one Lumenier QAV-X Build Kit

  qav-x build

This is a true all-in-one kit.  Not only does it include all the hardware needed, it includes the backup files for the Taranis (switches, audio alerts, switches and all other settings) and KISS configurator backup file with PIDs for this setup.  All you have to do is plug it in, restore the backup file and you're done with programming*.  Bam, that's it!

*The ESCs and accelerometer will still need to be calibrated in the KISS Configurator.  It's easy to do. Take the confusion and headaches out of messing with software and programming. Use this post for the build guide.

This Kit needs an Receiver

Please note, due to the amount of inquiries to swap or leave out the receiver, this kit doesn't include a receiver anymore.  You'll need to add a receiver such as the X4R-SB or XSR.

qav-x buildComponents
3D Parts
Misc Parts** - $10
Total Parts = $472 (with EMAX RS2205 2300KV motors)
**Misc items include heat shrink for the ESCs/arms , motor/power cable wire wrapbuzzer, header pins, nylon standoffs, VBAT cable, velcro strap and all the other small items needed to complete the build.
Backup Files
After you purchase the kit, you will get an order confirmation email (make sure you enter the correct email during checkout) with a link to download the following files:
  • Taranis - This file will have all the switches, voice prompts, timers and telemetry.
  • KISS FC - All settings and PIDs for this setup.
Require but not included items:
Transmitter - Taranis X9d Plus - $205
FPV Goggles such as the FatShark Dominator V3 Goggles
Propellers - I've been running the DAL T5045 props and love them on this setup.
Battery Charger - a basic Balancing Charger will work fine
Receiver such as the X4R-SB or XSR

qav-x cheat sheetYou want a super clean build?  Here it is!  Also included is a cheat sheet that shows you exactly how long to cut all the wires on the quad.  This takes all the guesswork out of how much wire to cut to streamline the installation.  The cheat sheet will be shipped with the kit package.   Use the Lumenier QAV-X build guide.  

1 Review Hide Reviews Show Reviews

  • 5
    Perfect for your first build

    Posted by Justin on May 17th 2017

    I'm completely new to the hobby and had been looking into building my first quad for a few months. I did a lot of reading on the internet, adding up the cost of parts, not really understanding how everything hooked up. I was about to order $900 worth of parts knowing it was about to be a very expensive headache, then I came across this site and their build videos. Awesome, I really needed to see how it all came together. Then I found out they sold a whole kit. Buying everything as a kit and watching the build videos made my first build a breeze. And buying it here was a whole lot cheaper than buying it from another site. The main reason why I bought this kit from Flight Club was I appreciate "clean" builds. Whatever you build in your life time, do it right and make it look professional. This kit is professional, from the "cheat sheet" helping you cut wires to the perfect length to the custom 3D printed mounts. I also liked the fact that the kit comes with all the random materials you’ll need to finish the build. You know the parts you see in the video are the ones you just bought so there is no questioning yourself. Some sections of the video do get a little confusing, but if you are somewhat mechanically inclined you’ll figure it out. For my first build I can honestly say that nothing looks out of place or half assed. I will definitely buy from Flight Club again and I highly recommend this kit to any noob like me wanting to get into this hobby.