FlightClub Tokio X Race Frame

(17 reviews) Write a Review
Back in stock 11/5
FlightClub Tokio X Race Frame
FlightClub Tokio X Race Frame

Now shipping with the new injection molded canopies!


Tokio X Page More info on Tokio X here

Prepare to change your perception of race quadcopter frames.  Even though the frame looks simple and minimalistic, look deeper and you will see every millimeter of the FlightClub Tokio frame has been engineered with an obsession to perfection.


Heavy emphasis was placed on protection and durability.  Less broken parts means maximum flight time. The FPV camera is the most commonly damaged component.  Tokio has three stages of camera protection.  All three are designed to dissipate the shock of impacts.

  1. Thick protruded lip around the lens.  This is designed so the lens sits inside the frame.
  2. Flexible canopy.  Absorbs the shock of impacts.
  3. Bendable bracket that mounts the camera. (A flexible FPV camera mount is recommended)

An ultra durable Thermoplastic Polyurethane Canopy houses all the delicate electronics.  Unlike a full carbon frame, a flexible canopy can dissipate the shock of impacts.  Carbon fiber is super strong but brittle.  There is zero give.  The impact will either damage the carbon fiber or your delicate onboard electronics.  A semi-flexible canopy is like flying around with a pillow around your electronics. VTX and antenna protection.  The antenna has been engineered to slope down below the propellers and not touch the ground.  If the frame lands upside down the antenna never touches the ground or propellers. Built in motor guards.  The shape of the carbon fiber around the motors is design to protect the motors.  Simple and effective design.


Introducing Butter Mount.  An innovative new way of mounting the flight controller stack.  The Butter Mounts are designed in a way the mounting screws never touch the carbon fiber frame.  Motors, unbalanced props or damaged props can transmit noise to the flight controller in the form of vibrations.  These micro vibrations can cause erratic flight behaviors, oscillations and in extreme cases burn out motors and ESCs.  Butter Mounts will greatly reduce if not eliminated flight controller vibration issues. Simple but smart way of mounting the canopy.  Only requires two screws to mount the canopy on the carbon fiber frame.  Makes it really easy to build or do field repairs.  Less hardware equals savings in weight.  Once mounted the canopy is guaranteed to not come off.

Attention to Details
  • Fully chamfered outside edges
  • Completely flat bottom with countersunk screws.  Prevents the battery from getting shredded by protruding screw heads.
  • Hypotensed Carbon fiber.  The frames are rotated 45 degree so the carbon fiber strands run down the arms
  • Antenna ports slightly below the top of the canopy to minimize damage
  • Easy access to change VTX channels
  • USB ports on sides of canopy
  • Camera angle lock (if used with the FOXEER Arrow or RunCam Swift)
  • Easy to swap battery strap

Great care was put into designing the shape of Tokio.  From the areodynamic canopy to the shape of the carbon fiber frame, we tried to minimize air drag by reducing the surface area in the Z  (vertical) and X (horizontal) axis.

  • 210mm True-X frame
  • 4mm fully chamfered hypotense bottom plate with countersink holes
  • Thermoplastic Polyurethane Canopy
  • Weight 103g
  • 4mm True-X Carbon fiber hypotense and outer edge chamfered bottom plate
  • Ultra durable Injection Molded Semi Flexible Thermoplastic Polyurethane (TPU) Canopy
  • 1.5mm carbon fiber VTX plate
  • Canopy mounting hardware
  • 4 - Butter Mounts
  • 4 - M3x12 Button head hex screws
  • 8 - Nylon M3 hex nuts
  • 4 - M3x8 Nylon standoffs
  • 3 - M3x8 Flat head hex screws (1 spare)
  • 2 - Antenna tubes
  • 2 - Antenna Caps
  • 1 - FlightClub velcro strap
  • Stickers!

The base Tokio X frame kit comes with the standard race canopy.  Add the additional GoPro canopy with the base kit and save $5.  This would include the race canopy and GoPro canopy.

Suggested build
Build Tips
  • Designed for a 2 or 3 flight controller stack.  A PDB, 4in1 ESC and flight controller can be used.
  • Maximum height for the stack is 24mm
  • Depending on the stack height, you can use X4R-sb, XSR (recommended), XM Plus, XM or Spektrum equivalent.
  • Needs to use micro video transmitters such as the FX799T (recommended), TBS Unify Pro series or any other VTX in this size.
  • Designed for the FOXEER Arrow V3 or similar FPV camera.  The HS1177 will work but will not be able to lock the camera angle.
Why you should get the FlightClub Tokio X

Tokio is perfectly suited for beginners looking for their first quad or a full fledged screaming race quad. Why it's suited for beginners:

  • Every component is fully protected (camera, motors, VTX, flight controller)
  • Easy to build.
  • Fully adjustable camera with angle lock (if used with the Foxeer Arrow or RunCam Swift)
  • Lightweight and strong

Why it's suited for a Race Quad

  • Protection
  • Easy to change VTX channel
  • Fully adjustable camera with angle lock (if used with the Foxeer Arrow or RunCam Swift)
  • Only need to remove two screws to access the entire quad inside.  Makes field repairs quick and painless.
  • Lightweight and strong



17 Reviews Hide Reviews Show Reviews

  • 5
    Great Frame for a Beginner

    Posted by Carson Wood on Dec 6th 2017

    I was really pleased with most everything about this frame. It is clearly the result of a lot of critical thought and was incredibly easy to assemble.

  • 5
    Super strong, fast flying,, the perfect frame?

    Posted by Ali Barrett on Sep 25th 2017

    Ive been flying this frame for about 6 weeks now and can say I'm as impressed with it as i had hoped i would be. The carbon is fantastic quality, its really stiff and the chamfered edges are a great touch. Minimal holes in it and with only 3 motor screw holes now it really has no weak points on the frame.

    The pod is a thing of beauti. Looks sleek and provides all the protection you need. While flying in carparks the thing just bounces in crashes instead of hearing that normal horrible carbon crunching sound.
    Overally very happy with the frame and the best one ive used in around 2 years of flying race drones.

  • 5

    Posted by Sam Gilfillan on Sep 12th 2017

    Great product

  • 5
    Fantastic Frame

    Posted by Chris on Jun 4th 2017

    The Tokio X frame is by far the best I've flown. I love the compact and tight build keeping everything protected under the canopy. Any modern motors will make this build quite agile! Thanks Mike for a wonderful and well-thought product.

  • 5
    Tokio X

    Posted by Tim on May 24th 2017

    Mike basically built my first quad a qav-xs one email at a time. Lol! So after trusting his guidance while building my first quad and listening to his design goals in his first clean-sheet quadcopter frame, I knew I had to give the Tokio X and try. Mike had three design expectations, make the Tokio X easy to build, protection, and make it fast. Well just looking at it you know it's gonna be fast. Easy to build, this was my second build and I finished it in three hours. Coming from a Noobs perspective, I had no issues building the Tokio X and with its protection this quad is perfect for anyone wanting to build their first quadcopter. And because of FlightClub's customer service I knew if I had any questions during my build Mike would answer them quickly. Throw in the frames lifetime warranty it's a no brainer. So Mike, awesome job on the Tokio X, I can't wait to see what's coming next.

  • 5
    Tokio X Race Frame

    Posted by Jayrald Rabago on May 23rd 2017

    My first experience with a x-frame type build was the qavx, which I followed FPV Flight Club's tutorial on youtube. The quality of the video and instructions were great! Then noticing that a frame was developed and hearing about the thought and features it was coming with...I just had to have!

    Building was a pleasure! Especially with the Betaflight F3 all in one - everyone was kept nice and tidy and fit well under the canopy (with the vtx, frsky xm+, and various wires. The smoothed edges made handling the frame a nice experience and less pre-work in the build. I haven't crashed it yet, but it definitely feels like a quality frame. The canopy was also well designed with windows cut for: various fpv camer angles, usb access to the fc (both left and right side), rx antenna, vtx board, and vtx antenna. The two screws holding it down make it easily to quickly access the insides for repairs/adjustments to the fpv camera angle.

    If I could change one thing, would be that I wish there was an option or note when I initially purchased the frame for the tpu printed runcam swift mount. I would have definitely purchased this as I noticed the metal mount that comes with the runcam swift can be easily bent. If the stl file for the mount could be shared...that would be great =) Can't wait for the injection mold of the canopy!

    I'd definitely recommend this to anyone looking for a tight build and one that can withstand a beating. I may need to buy a couple more when i consider becoming more competitive in races.

    Thanks FPV Flight Club for designing an awesome frame! Maybe consider different size frames (3'', 4'', and 6'')?

  • 5
    Tokio X

    Posted by Billy on May 21st 2017

    Great quality and design. Took care of problem i had with an electrical component, fantastic customer care. Easiest frame I've assembled, love the protection the canopy offers, and the antennae mount/angle.

  • 5
    The Tokio X frame appears to me as a highly carefully planned High end reacing frame. It is manufactured with highest precision and it is as much joy putting these beautiful components together as racing it. I use it with the raceflight setup and the

    Posted by Thilo Kollmann (Mager Knilch) on May 18th 2017

    The Tokio X frame appears to me as a highly carefully planned High end reacing frame. It is manufactured with highest precision and it is as much joy putting these beautiful components together as racing it. I use it with the raceflight setup and the bolt ESC with X-foot 2207 motors. i like most the invention of the buttermounted FC, it ensures brilliant functionallity of the gyro in my case. due to a high risk manoever that I messed up the bottom plate on the outer end of one of te arms. The flightclub stood fast and reliable to their word and exchanged the bottomplate at once. I highly remommend this frame as I think its one of the most sophisticated frames to fly with to date and as it condenses in a pure and beautiful design durability and performance.

  • 5
    Awesome X

    Posted by T Rex on May 9th 2017

    This frame is amazing. The attention to detail and the way the carbon is cut makes it a awesome frame. The lifetime warranty is also great. Customer service is outstanding. I look forward to learning to fly better faster with less repair time with this frame. Flightclub thank you for the effort to make a truly leading edge quad frame.