FlightClub Phuket Frame

(2 reviews) Write a Review
Back in stock 12/9
FlightClub Phuket3
FlightClub Phuket 3"

Introducing the FlightClub Phuket3.  Pronounced (poo-ket) or (f*ck-it), depending on your mood and flying style.  The Phuket3 is a 140mm stretch X mini frame made for 3" props.  Just like it's bigger brother Tokio, Phuket rocks a durable TPU canopy that's made to take abuse and keep you flying.

Simple design - Phuket is an ultralight unibody canopy quad.  Borrowing design aspects from it's bigger brother Tokio, Phuket's canopy is meticulously designed to provide ultimate protection and ease of build.  The canopy mounts to the frame using just three screws.  The three screws go into stubby 10mm standoffs that form a super strong cage around the single stack AIO.  Remove the canopy and you have access to the entire internals.  Phuket is designed for a single stack AIO flight controller and ESC like the Cicada 30A F4, Asgard F4 AIO, Lumenier ALPHA 30A BLHeli32 or RaceStar 30A AIO.  The KISS AIO can be used too but the motors need to be remapped.

Protection - The canopy protects all the internals including the camera, VTX and antenna.  With an AUW of less than 160g (no battery) and sporting a 3.5mm frame it will be hard to break anything.  Pair it with the Phuket Arm Guards to turn it into the ultimate garage banger.

Canopies available in black, red, green, blue, grey, purple and white

  • 3.5mm 45 degree rotated carbon fiber frame
  • Chamfered edges
  • Countersunk holes on bottom of frame for completely flat bottom
  • Has fc mount holes for 30x30 or 20x20
  • Ultra durable TPU canopy
  • Antenna ports on the canopy
  • Easy access to the VTX
  • Designed for 14xx size motors 
  • 42g for frame, canopy and hardware
  • 3.5mm Carbon Fiber frame
  • TPU canopy
  • 4 x Flat head M3X12mm screw
  • 4 x Silicon grommet spacers
  • 4 x M3 nylon nuts
  • 3 x 10mm Hex spacers
  • 3 x Flat Head M3x6 screws
  • 3 x M3x6 screws
  • 2 x 3" Antenna Tube
  • 2 x Antenna Caps
  • Velcro strap
  • Stickers
Suggested build List

Note: the Phuket is designed for a single stack like an FC/ESC AIO. You can also use an FC/PDB like the Betaflight F3 then mount ESCs on each arms.  It can be built with a double stack but you'll need to use 20mm standoffs instead of the included 10mm standoffs.  

Videos Hide Videos Show Videos

2 Reviews Hide Reviews Show Reviews

  • 5
    Phucket frame

    Posted by Danny on Oct 27th 2017

    Best micro frame yet. Had a mrm micro reaper and that thing might as well be cardboard compared to this frame. Wish the phucket was out 2 months ago. Great job can't wait for the proton

  • 5
    Phuket Frame kit Review

    Posted by Brad Turbo Ivie on Oct 16th 2017

    So far I feel this is one of or probably but I'm a bit biased hehe the best 3" frames out there if your looking to build a little backyard BURNER as to say! For this little guy isn't far off from it's big brother the Tokio SX 5" race frame I have it as well and it is BY FAR my favorite I do believe, and this lil' Phuket is going to be in the crowd as well for if I can get it all- Cicada AIO FC/4 in 1 ESC 30A and the Runcam Split's board on the stack and still able to close the "hood" this is going to be one neat little quad!! WITH REAL HD 1080 footage!! With no GoPro no external cam needed hopefully!! If all goes well going to try to get it all stuffed in there without raising the canopy reason for the Cicada all in one there's two of em into one right there really RX and VTX and ready to go, but I want the HD footage and so I believe there is just enough room for all even slightly larger than micro Swift or Sparrow camera as well!! I'll post more and pics when the build is finished! KILLR FRAME MIKE AT FLIGHT CLUB!! THX a million!! Awesome people right here!! Brad "Turbo" Ivie.