Custom QAV250

$750.00
(No reviews yet) Write a Review
SKU:
customqav250
Custom QAV250
Custom RFT Lumenier QAV250

Save yourself the headache of building, programming, troubleshooting and tuning with a ready to fly custom Lumenier QAV250.   custom qav250

lumenier-qav250Frame

This build uses the newest carbon fiber Lumenier QAV250 v1.1.  This frame doesn't have the extra cutout in the arms and has more carbon fiber on the arms.

Motors

This quad can be built with 2100kv or 2300kv motors.  Both can be set up to run 3s or 4s. The 2300kv are good on 3s with any props and 4s up to 5045 props.  If you go any higher on the props it will really shorten the flight time. The 2100kv, if running 3s would need at least 5040 props.  It will be pretty slow on 3s, 5030 props.  The 2100kv are really made for 4s batteries and can run ultra high thrust props up to the 5050 tri-blade bullnose props.  This is scary fast. If you want to use different motors, please send me a note.

OSD

The OSDoge board will be used in this build.  It will display your voltage, low battery alert, RSSI, flight time and many other useful info on your screen.  RSSI (radio signal strength indicator) is great for making sure you always have control of your quad.  The OSDoge will let you tweak your PIDs right from your goggles.

Components
QAV250 Frame - $150
BL20A ESC - $48
OSDoge - $70
600mw VTX - $70
FPV Camera - $35
Misc Parts* - included
 
Total Parts = $568
 
3D Crash Pack** - $30 (discounted)
Build and tune fee - $150
 

 

Total Ready to fly QAV250 (no Transmitter or goggles) - $750
 

 

*Misc items include heat shrink for the ESCs, XT60 power cable, motor/power cable wire wrapbuzzerM3x5 motor screws, header pins, nylon standoffs for the Naze32 and all the other small items needed to complete the build.
 

 

**3D Crash Pack includes adjustable FPV camera mountd4r-ii mountmotor guardsFirewallvideo transmitter shell and PDB spacer.
 

 

There's a big difference between the FlightClub RTF QAV250 vs the Getfpv RFT QAV250.
 
 

 

FlightClub RTF is a true ready to fly that includes a receiver and full FPV setup with OSD.  All that's needed is to bind it with the Taranis and put in a battery.  The GetFPV RTF you still need a receiver, FPV camera, Video transmitter and Spironet antenna (optional).  So to add these to the GetFPV RTF with OSD would be an additional $265.
 

 

So the FlightClub RTF cost less and includes better parts and has more parts.
 
Require but not included items:
 
Transmitter - Taranis X9d Plus - $205
Battery - Tattu 3s 1300mAh 75c - $25 or Tattu 4s 1300mAh 75c - $35
Battery Charger - a basic Balancing Charger will work fine
 

 

 Here's how to order.

If this item is marked out of stock, that means we are building.  Rather than have customers prepay for the quad and wait a long time to get it, we'll only make it in stock if we are available to build.  The turn around time is about a week.  Sign up to be notified once they go in stock.  I don't want to make customers wait a long time after payment :) The quad will come with a Taranis bin file that will have all the switches, voice prompts and RSSI programmed.  Once it's loaded the quad is ready to fly! Note: This is a custom item so shipping time will be within 7 days.